Finned Tubes/Pipes

METALCO offers different finned tubes: tension wound finned tubes, copper fin tubes, embedded finned tubes, extruded finned and low finned tubes. Tension would finned tubes are formed by winding a strip made of aluminium or copper around the tube under tension. The strip winding technology provides different types of fins: L-fin, LL fin, KL fin. Embedded fins (G fins) are made by winding aluminium or copper strip into a helical groove machined on the outer surface of the tube. Extruded Finned tubes are bimetallic tubes whose outer aluminium surface is finned by cold plastic deformation. The low finned tube is a finned tube obtained through plastic cold deformation. The method consists in realising from a smooth tube, dins with a particular geomantic form without removing material; this plastic deformation causes an increment of heat exchange efficiency and allows to reduce the heat exchanger size. The finned tubes quality is assured by hydrostatic and pneumatic tests.

Brass, Copper-Nickel & Copper METALCO offers different finned tubes: tension wound finned tubes, copper fin tubes, embedded finned tubes, extruded finned and low finned tubes. Tension would finned tubes are formed by winding a strip made of aluminium or copper around the tube under tension. The strip winding technology provides different types of fins: L-fin, LL fin, KL fin.

Embedded fins (G fins) are made by winding aluminium or copper strip into a helical groove machined on the outer surface of the tube. Extruded Finned tubes are bimetallic tubes whose outer aluminium surface is finned by cold plastic deformation.

The low finned tube is a finned tube obtained through plastic cold deformation. The method consists in realising from a smooth tube, dins with a particular geomantic form without removing material; this plastic deformation causes an increment of heat exchange efficiency and allows to reduce the heat exchanger size.
The finned tubes quality is assured by hydrostatic and pneumatic tests.

Brass, Copper-Nickel Copper

• Tension wound finned tubes, embedded finned tubes, extruded finned and low finned tubes.
• Tension would finned tubes are formed by winding a strip made of aluminium or copper around the tube under tension.
• The strip winding technology provides different types of fins: L-fin, LL fin, KL fin.

METALCO manufactures U-Bend tubes confirming to the international Standards and as per the customer requirements. These tubes have been added to our product range so to offer added value to our esteemed customers. Roundness, Straightness, Uniformity of the wall thickness and inner and outer surface of the tube are the unique features so as to make them suitable for intended Applications. U-bend tubes are mainly used to enhance the design of heat exchangers where is there are space constrains and heat transfer are required to be done on faster basis. Special care is being taken in packing this product to avoid any variation in U-bend radius during transit.
The U-bend tube quality is guaranteed by means of hydrostatic and pneumatic tests, eddy current tests and non-destructive tests (hardness, dimensional, dye penetration inspection.

Brass, Copper-Nickel & Copper

• U-Bend tubes confirming to the international Standards and as per the customer requirements

Product Details :

Minimum Order Quantity	1000 Piece
Shape	U-Shaped
Usage	Industrial
Material	Brass,Copper And Nickel